嘿伙计们欢迎回来。
Hey guys welcome back.

是时候测试一下我们的流程图，看看它是否有效，看看它看起来有多糟糕。
Time to test out our process graphic and see if any of it works and see how terrible it looks.

因此，让我们继续点击运行按钮，然后开始吧。
So let's go ahead and hit the run button and here we go.

我们去取得它。
Let's get it.

复活了，我们还活着，一切都好。
Come to life and we are alive and all right.

我看到了压力。
I see pressure.

我看到压差罐液位看起来不错。
I see differential pressure tank level looks good.

我确实想在我的水箱顶部再贴一个标签来以数字方式显示我的水平，我还看到我的泵后面疯狂的灰色背景，我真的很讨厌这个，因为我们在节目中看到了我们的水平一个屏幕。
I do want to throw one more label to show my level numerically on top of my tank and I'm also seeing that crazy gray background behind my pump and I'm really hating that cause where we're we we had our on our show a screen.

看，我们那里没有灰色背景，但它确实出现在这里。
See we don't have that gray background there but it does show up in here.

所以我们需要摆脱它。
So we need to get rid of that.

这个不应该在那里。
This shouldn't be there.

因此，让我们离开那里，我将继续快速处理这两件事。
So let's jump out of there and I'm going to go ahead and take care of those two things real quick.

因此，让我们复制并粘贴我们的关卡。
So let's copy and paste our level.

这将是PC。
And this is going to be P.C.

让我们继续写一个百分号。
Let's go ahead and just write in a percent sign for that.

然后对于这个顶层，而不是 P-T 2，它将是 LTE 1，让我们用我们的刻度值坦克液位替换该标签。
And then for this top level instead of P-T two that's going to be LTE 1 and let's replace out that tag with our scale values tank level.

所以我相信这是真正的 SUV 油箱水平，我们将继续保持相同的精度。
So I believe that's a real SUV tank level and we'll go ahead and leave the same precision.

但我也会改变掩码，这样我们就可以保存整个数字，因为我们确实需要前面的三位数字，以防万一这个东西达到 100% 接近。
But I will also change the mask so that we can hold the whole number because we do need three digits in the front just in case this thing ever got up to 100 percent close out of there.

所以我认为这很好。
So I think that's fine.

现在这个泵怎么样，我要从这里删除那个泵。
And now what about this pump I'm just going to delete that pump from here.

我将返回到 H-2A，看看是否可以复制并粘贴它并使其因某种原因以不同的方式工作，如果这不起作用，那么我可能必须重新导入该符号。
I'm going to come back over into H-2A and see if I can just copy and paste that and make it work differently for some reason and if that doesn't work then I'll probably have to reimport the symbol.

所以实际上看起来我的尺寸很完美。
So actually it looks like my size is perfect.

我认为这会很好地发挥作用。
And I think this is going to work just fine.

让我们放大一下，以确保我已经正确对齐了一半，并且在我们的第一次尝试中还不错。
Let's zoom into that just to make sure I've got it halfway aligned correctly and man not too bad on our first go.

但我确实认为我仍然想尝试在不使用快照的情况下进行一些调整。
But I do think I still want to try a little bit of tweaking with out my snaps.

我就是这样喜欢它。
And I love it just like that.

那么，让我们把我的快照放回去吧。
So let's put my snaps back on.

返回到 100% 的正常缩放，让我们跳回运行模式，看看我们现在处于什么位置。
Go back to my normal zoom of 100 percent and let's jump back into run mode and see where we're at now.

好的。
All right.

我可以看到我已经 71 了，提升了 40% 的水平。
I can see I've got 71 up 40 percent level.

好的。
OK.

我们正在爬升我们的泵，显示我们的阀门配置看起来不错。
We're climbing our pumps showing energize our valve configuration looks good.

我可以看到我在系统周围的压力。
And I can see my pressures around the system.

我可以看看我的 DP，我有流量指示。
I can look at my DP I've got flow indicating.

一旦达到 80，我认为它会持续大约三到四秒或五秒。
And once this gets up to 80 It'll go for about three or four more seconds or five seconds I think it is.

然后泵将关闭。
And then the pump will shut off.

所以我的流量指示器。
So my flow indicator.

我们开始吧。
There we go.

无流量。
No flow.

我们没有待处理的反洗。
We've got no backwash pending.

一切都很好。
Everything's good.

我将称之为成功，我们将继续前进。
I'm going to call that a success and we're moving on.

这就是本次讲座的内容。
So that's it for this lecture.

我会在下一个教堂见到你。
And I will see you in the next church.